172
W&T
Safety Timeout / State
The entered value times 100ms is the timeout time; you can
enter values between 1 and 9999.
Example: a value of 50 represents 5 seconds.
As a rule of thumb, use a timeout that is 10x longer than the
time between two scheduled or expected accesses.
Send the settings to the Web-IO by clicking on the
Temporary
Storage
button.
6.2.2 Safety State festlegen
Select in the navigation tree
Config >> Ports >> Outputs >>
and
for example
Output 0
Safety State
Select
Safety State Enable
if you want the output to be set to a
fixed state when there is a fault. Specify whether the output shall
be switched to the
ON
or
OFF
state.
Outputs that are not selected keep the state that was present when
the fault occurred.
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...
