W&T 57630, Manual

Page: 126 / 211

126
W&T
Box-to-Box
After clicking on the Save button all the settings are updated in
the Web-IO and the start page is reopened in Default User
mode.
5.6.5 Stopping Box-to-Box Modus only for the Slave
If the master is no longer available, for example because there
is no network connection but you still want to deactivate Box-
to-Box mode for the slave, select in the navigation tree
Config >> Session Control >> LogOut .
In the configuration frame there should be an additional button
Stop Box2Box Slave .
If this button is not displayed, first click on the Reset button. This
will restart the Web-IO.
A f t e r a n e w L o g i n a n d i n v o k i n g C o n f i g > > S e s s i o n
Control >> LogOut the Stopp Box2Box Slave button will be
displayed. Clicking on it will deactivate Box-to-Box mode in the
slave.
5.7.6 Box-to-Box notes and limitations
Runtimes
Please note that when sending data using a network protocol,
system-related runtime delays occur.
In contrast to a direct cable connection, whereby a switching signal
is present directly on the actuator, latency times of between 20 and
50 ms must be factored in.