158
W&T
Alarm
So that a TCP data packet is sent to the active TCP client
application when the alarm condition is met, go to
Config >>
Device >> Alarm >> Alarm1
in the
Enable
area and select
Send
input to pending TCP connections
Send the settings to the Web-IO by clicking on the
Temporary
Storage
button.
Once you have made all the entries pertaining to the alarm,
a c t i v a t e t h e n e w s e t t i n g s u s i n g
C o n f i g > > S e s s i o n
Control >> LogOut, Save.
5.11.6 Alarm message to a TCP server
You can also send an alarm messag to a TCP server. If there is
an alarm the Web-IO opens a TCP connection to the configured
Server and sends the message. The server hat to close the
connection after recept of message.
To activate TCP client for alarm transmission, select in the
navigation tree
Config >> Device >> Alarm >> Alarm1
and
select
TCP Client Enable
in the
Enable
area.
m
Required access rights:
Administrator
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...