54
W&T
HTTP - Inputs and Outputs control from the Browser
Port name and description
You can also set up individual names and descriptions for the
inputs and outputs.
To change the input name, select in the navigation tree
Config >> Ports >> Inputs
and for Input 0
>> Input 0
:
I
Please do not make any changes to the settings for
Input
Mode
at this time. For detailed information about these
parameters, refer to section
General Settings.
For changes to the output names select
config >> Ports >> Outputs
and for example
>> Output 0
for
Output 0
Summary of Contents for 57630
Page 8: ...8 W T Content...
Page 22: ...22 W T Assigning the IP address...
Page 44: ...44 W T configuring the network parameters...
Page 194: ...194 W T Diacnostics and testing...
