W&T 57630, Manual

Page: 14 / 211

14
W&T
Assigning the IP address
2.2 Assigning the IP address using the ARP command
1
This method can only be used if the Web-IO does not yet
have an IP address, i.e., if the entry is 0.0.0.0. To change
an IP address, use one of the other methods described in this
section or use the menu item Config/Device/Network in the Web-
Based Management of the Web-IO.
An additional prerequisite is a computer which is located in the
same network segment as the Web-IO and on which TCP/IP
protocol is installed. Read off the Ethernet address of the Web-IO
from the sticker on the side of the housing:
5763x [Model]
EN=00c03d003fa0
OK xxxxxx
Ethernet address
Now use the following command to add a static entry to the
ARP table of your PC :
arp -s [IP address] [MAC address]
Example under Windows:
arp -s 172.16.231.17 00-C0-3D-00-3F-A0
Example under SCO UNIX:
arp -s 172.16.231.17 00:C0:3D:00:3F:A0
i
Older Windows systems accept a static entry only if a
dynamic entry already exists. Here you should first ping
another network station.
Finally start the Web browser and enter the following URL:
http://[IP address]
[
Return
]
Example: