W&T 57630, Manual

Page: 94 / 211

94
W&T
TCP / UDP - Binary
.
Default - If you want access to the Web-IO to be password
protected.
.
Compatible 50xxx - If you want to access applications that
were programmed for the older Digital I/O Com-Servers. You
can also use this mode for new applications that do not require
password protection.
i
Additional information concerning Box2Box Slave and
OPC Device modes can be found in the corresponding
sections.
Once you have made all your settings, send them to the Web-
IO by clicking on the
Temporary Storage button.
In addition you must enable the corresponding outputs for binary
mode.
Under Config >> Device >> Output Mode select the desired bnary
access.
m
Required access rights: Administrator
Once you have made all your settings, send them to the Web-IO
by clicking on the
Logout button. Clicking on the Save butto n
activates the settings.
i
All the configuration possibilities shown for Binary 1
can also be used for Binary 2.
5.6.3 The Web-IO as socket client
To operate the Web-IO as a socket client, you must make a few
additional settings.