W&T 57630, Manual

Page: 188 / 211

188
W&T
Diacnostics and testing
You can also process error and diagnostic messages using
SNMP traps or as a Syslog system message. See the SNMP and
Syslog sections.
6.7.2 Configuration
Overall view
The Web-IO allows the Administrator to view and check the
Web-IO configuration on a comprehensive Web page.
Select Diag >> Test >> Check Config
The Web page shows which access types are activated with
which parameters. Here the Web-IO performs a plausibility check
of the settings. If missing parameters are detected which
prevent proper operation of the access type, the corresponding
fields are highlighted in orange.