Wacker Neuson G 230, Operator'S Manual, Page: 8 / 254

Table of Contents G 230 / G 240
wc_bo5000186930_09_FM10TOC.fm
8
7 Operation (Basler Controller) 54
7.1 Main Circuit Breaker ........................................................................... 54
7.2 Engine Start Switch ............................................................................ 55
7.3 Genset Pre-Alarms and Alarms (Shut-Down Conditions) ................... 56
7.4 Overcurrent Condition ......................................................................... 57
7.5 Idle Switch .......................................................................................... 57
7.6 Diesel Particulate Filter (DPF) ............................................................ 58
7.7 Using the Lugs and the Convenience Receptacles ............................ 59
7.8 Selecting the Voltage .......................................................................... 60
7.9 Before Starting the Machine ............................................................... 63
7.10 Starting and Running the Generator ................................................... 64
7.11 Stopping the Machine ......................................................................... 66
7.12 Emergency Stop Switch ...................................................................... 66
7.13 LCD Panel: Monitoring Machine Operation ........................................ 67
8 Working with Basler Controller 69
8.1 How to Use the Genset Controller LCD and Keypad .......................... 69
8.2 Menu Diagram of the Genset Controller ............................................. 70
8.3 Menu Diagram Components ............................................................... 71
8.4 Using the Metering and Settings Menus ............................................. 72
8.5 Logging in to the Genset Controller by Entering the Password .......... 73
8.6 Adjusting the LCD Screen Contrast .................................................... 76
8.7 Changing the Time/Date Settings ....................................................... 77
8.8 Changing the Sender Fail Time Delays .............................................. 78
8.9 Changing the Units of Measure .......................................................... 80
8.10 Changing the Low Fuel Pre-Alarm Setting ......................................... 82
8.11 Changing or Disabling the Low Fuel Alarm Setting ............................ 84
8.12 Changing the Cooldown Time Setting ................................................ 86
8.13 Changing the Pre-Crank Time Delay (Glow Plug Timer) .................... 88
8.14 Changing the Maintenance Interval .................................................... 90
8.15 Resetting the Maintenance Interval Pre-Alarm ................................... 92
8.16 Resetting a Loss of Voltage Pre-Alarm ............................................... 94
8.17 Accessing and Using the Event Log ................................................... 95
9 Operation (Deep Sea Controller) 97
9.1 Main Circuit Breaker ........................................................................... 97
9.2 Genset Controller Power Switch ......................................................... 98
9.3 Selecting the Voltage .......................................................................... 99