Wacker Neuson G 230, Operator'S Manual, Page: 134 / 254

wc_tx003548gb_FM10.fm
134
Mobile Generator Diagnostic Trouble Codes (DTC)
158 0 KSW BATT VOLTS HI HI Key Switch Battery Potential is above the HIGH
HIGH threshold
158 1 KSW BATT VOLTS LO LO Key Switch Battery Potential is below the LOW
LOW threshold
158 15 KSW BATT VOLTS HI Key Switch Battery Potential is above the HIGH
threshold
158 17 KSW BATT VOLTS LO Key Switch Battery Potential is below the LOW
threshold
168 # LOW BATT VOLT Low Battery Voltage string used in event log
and/or Alarm and
Prealarm annunciation
174 0 Fuel Temp EXT HI Fuel Temp (Extremely High)
174 3 Fuel Tmp Sns Volt HI Fuel Temp Sensor Input Voltage (High)
174 4 Fuel Tmp Sns Volt LO Fuel Temp Sensor Input Voltage (Low)
174 16 Fuel Temp MHI Fuel Temp (Moderately High)
175 # ENG OIL TEMP Caption used on front panel for Display of J1939
Parameter
188 17 SPEED AT IDLE LO Metering string for ECU trouble code metering
indicates Engine
Idle speed is below the LOW threshold
189 0 Engine Spd DERATE Engine Speed Derate
190 0 Engine OvrSpd EXTRM Engine Overspeed (Extreme)
190 1 ENGINE SPEED LOW Engine speed is below the LOW threshold
190 16 Engine OvrSpd MODRT Engine Overspeed (Moderate)
190 17 SPEED AT IDLE LO Engine Idle speed is below the LOW threshold
190 # ENGINE SPEED Caption used on front panel for Display of J1939
Parameter
237 2 VIN Data MisMatch VIN Data Mismatch with other controllers
412 0 EGR Temp EXT HI Exhaust Gas Recirculation Temp (Extremely
High)
412 3 EGR Temp In Vlt HI Exhaust Gas Recirculation Temp Input Voltage
(High)
412 4 EGR Temp In Vlt LO Exhaust Gas Recirculation Temp Input Voltage
(Low)
412 16 EGR Temp MHI Exhaust Gas Recirculation Temp (Moderately
High)
520 # RETARDER % TORQUE Caption string for retarder % torque
Failure Code
String Displayed Description
SPN FMI