Wacker Neuson G 230, Operator'S Manual, Page: 157 / 254

wc_tx003871gb_FM10.fm
157
Machines with Aftertreatment Exhaust System
Continued from the previous page.
2. Set the engine start switch (a) to the REMOTE START position. The DEF level
(in percentage of the DEF tank capacity) is displayed on the left side of the LCD
screen.
3. Start the engine by setting the engine start switch to the START/RUN position.
Note: The controller will only display the increasing DEF level while the engine is
running.
4. Fill the DEF tank until the DEF level reaches 100%.
5. Re-install the DEF cap.
6. Place the engine start switch in the OFF position.
0 0
READY 100%
0.0 P2
13% 0 25.3 63
A Ø HZ
V
R Basler
DIAGNOSTICS
DIAGNOSEN
DIAGNOSTICOS
DIAGNOSTICS
AUS AUS
APAGADO APAGADO
ARRET ARRET
OFF OFF
REMOTE START REMOTE START
FERNSTART FERNSTART
ARRANQUE REMOTO ARRANQUE REMOTO
DEMARRAGE A DEMARRAGE A
DISTANCE DISTANCE
START / LAUFEN START / LAUFEN
ARRANQUE / MARCHA ARRANQUE / MARCHA
DEMARRER / MARCHE
DEMARRER / MARCHE
START / RUN START / RUN
wc_gr012292
a