Wacker Neuson G 230, Operator'S Manual, Page: 110 / 254

wc_tx003619gb_FM10.fm
110
Mobile Generator
Operation (Deep Sea Controller)
9.9 Emergency Stop Switch
Location The emergency stop switch is the red button (a) located to the left of the control
panel. The button can be accessed with the panel doors closed. It is electrically
isolated from the switch and also from the rest of the metering panel.
Operation Activate the emergency stop switch by pressing the red button. This results in the
following actions:
■
The main breaker opens.
■
The “Main Breaker Open” LED illuminates.
■
The engine stops.
■
The LCD panel (b) displays a flashing “Emergency Stop” message.
■
The “Alarm” LED illuminates, and an audible alarm will sound.
To silence the audible alarm, press the Horn Reset button on the keypad. The
flashing message and illuminated LED will remain visible until the emergency stop
switch is deactivated.
To deactivate the emergency stop switch, pull the red button out.
NOTICE: Press the emergency stop button only in the case of an actual
emergency where the generator must be stopped immediately! In all other
instances, open the main line circuit breaker and then press the off button.
E
M
ERGENC
Y
S TO P
DSE
DEEP SEA ELECTRONICS
DSE 7310
wc_gr009857
a
b
STOP