Vonage V-Portal User Guide
Caution:
Incorrectly changing these settings may interrupt your Internet or voice service or
increase the vulnerability of computers on your home network to hacker attacks. We recommend
at only users with advanced networking knowledge change these settings.
e page, click on the Advanced Setup tab. The Port Setting screen will be
isplayed. The Port Triggering section is at the second section on that screen:
th
To setup Port Triggering:
From the hom
d
•
Trigger Range:
. These ports will be monitored for outgoing traffic and
ing of the Target Range ports to allow incoming traffic
will be opened to allow incoming traffic
when outbound data activity is detected on the Trigger Range ports.
•
Select the appropriate Protocol used – TCP,UDP or Both
•
Click on the Enable checkbox to activate the Port Triggering rule.
•
Click
Apply
Repeat the steps to setup additional Port Triggering rules.
If you need to specify more than 5 port triggering rules, click on the
Show more rows>
Enter the Start Port and End Port
when detected will trigger the open
to those ports.
•
Target Range:
Enter the Start Port and End Port. These ports
link.
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
Section 11 which explains limitations on Warranty, Remedy and Liability.
57