Vonage V-Portal User Guide
HINT: If you are installing behind a router that you did not specifically configure to use different IP
Addresses for every device connected to the router, then your router uses DHCP.
A DHCP connection is the easiest Internet connection to setup. In most cases, your Vonage
device requires no additional configuration to use DHCP. It will function properly right out of the
box.
If you had previously set your V-Portal to use a Static IP Address or PPPoE connection to access
the Internet and would like to re-configure it to use DHCP:
Log in to the Web UI. From the home page click on the Basic Setup tab and then choose the
Connect to the Internet sub-menu. Select DHCP from the Connect Using drop down list. The
following screen will be displayed:
•
Enter
the
MTU Size** (optional). If no value is entered, the default value will be used. W
recommend using the default value unless your ISP or Vonage Customer Care has
asked you to change it.
•
Click
the
A
e
pply button
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
Section 11 which explains limitations on Warranty, Remedy and Liability.
44
