Vonage V-Portal User Guide
•
Enter
the
Local IP Address
The Local IP Address is the destination IP address. It is the private IP address of the
computer that is hosting the service/application.
•
Enter
the
Start Port.
•
Enter
the
End Port.
NOTE: You can enter a single port or a range of ports to forward to a computer on your
LAN. To specify a single port, enter the same port number in the Start Port and End
Port fields.
•
Select the appropriate Protocol used to access your hosting service – TCP, UDP or
Both
•
Click on the Enable checkbox to activa the Port Forwarding rule.
te
•
Click
Apply
Repeat the steps to setup additional Port Forwarding rules.
If you need to specify more than 5 port forwarding rules, click on the
Show more rows>
link.
o remove or disabl
T
with the rule
e a Port Forwarding rule, simply uncheck the Enable checkbox associated
you want to disable.
ins
is used
cations’
Port Triggering
Port Triggering is a specialized form of Port Forwarding. It dynamically opens and closes ports to
allow Internet traffic access to your LAN. In contrast, Port Forwarding opens a port and it rema
open until you disable it. With Port Triggering, when the device detects outgoing traffic on
previously defined ports, specific ports (also previously defined) are opened. This method
for special applications such as interactive gaming, video conferencing programs, and file transfer
in chat programs.
he specific port forwarding rules you need to implement will be detailed in the appli
T
documentation.
Refer to your software application documentation for more information on specific port settings.
Setting up Port Triggering
View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to
Section 11 which explains limitations on Warranty, Remedy and Liability.
56