Videonics MXPro DV, User Manual

Page: 193 / 198

MXP
RO
DV D
IFFERENCES
R
OUTE
M
ENU
D
IFFERENCES
185
Analog Audio Adjustments
Press
SHIFT
+
AUDIO MIX
to display the Analog Audio Adjustments screen. This screen
was added to let you fine tune your analog audio inputs. You can make manual or
automatic gain adjustments to each input, and you can add delay to the audio
path (up to three fields of delay) to compensate for video delays that might occur
elsewhere in your audio/video chain. See “Using the Analog Audio Adjustments
Function” on page 143 for more information.
Cut Speed
Using two DV and two analog inputs, cut speed is almost instantaneous (1-2
frames). In configurations with more than two analog inputs, you can minimize
cut delay by selecting Display Next or Display Current for the preview screen dis-
play mode.
Headphone Location
The headphone jack was moved to the rear panel, near the middle.
Headphone Toggle
To toggle the headphone between the CURRENT and NEXT audio source, press
SHIFT
+
VIDEO
/
AUDIO
. If 4-channel audio is used, the key sequence toggles between
Audio 1 and Audio 2 of the CURRENT source, then Audio 1 and Audio 2 of the
NEXT source. The headphone icon is preceded by a “1” or a “2” to indicate
whether audio 1 or 2 is being played ( and ). 1 2