Videonics MXPro DV, User Manual

Page: 85 / 198

I
NPUT
E
FFECTS
S
PECIAL
K
EY
C
OMBINATIONS
77
Special Key Combinations
Use the following key combinations while working with the Input Effects menu.
When you are not working at the Input Effects menu, use the following key
combinations.
When the Input Effects LED light is lit, Input Effects are enabled. MXProDV applies
the effects according to the parameter values for each effect.
When you use the
SHIFT
+
INPUT EFFECTS
key combination to disable Input Effects,
MXProDV turns off the LED light. It does not change any effects parameter values,
but it does prevent the current Input Effects from being used. Press
SHIFT
+
INPUT
EFFECTS
again to enable them.
Table 7: Input Effects Mode Key Combinations
K
EY
C
OMBINATION
R
ESULT
ARROW
keys Moves cursor (or, highlight) between the different Input
Effects.
Numeric Keypad Directly sets the parameter value for the highlighted
effect.
INPUT EFFECTS
or
OK
Exits from Input Effects mode.
EFFECTS
buttons Moves the cursor directly to that effect – for example,
press
POSTERIZE
to highlight that effect: press
MOSAIC
to
highlight that effect: and so on.
If the selected effect matches the currently highlighted
one on the Input Effects menu, pressing the
EFFECTS
but-
ton increments the effect’s parameter value by one.
SHIFT
+0
(zero)
Resets all effects to 0 (off) for the selected channel.
Table 8: Main Mode Input Effects Key Combinations
K
EY
C
OMBINATION
R
ESULT
SHIFT
+
EFFECTS
button
Increments the parameter value by one for the selected
effect and applies it to the CURRENT source.
SHIFT
+
INPUT EFFECTS
Temporarily disables and re-enables Input Effects from
being sent to Program out. See the following paragraph.