Videonics MXPro DV, User Manual

Page: 77 / 198

T
RANSITIONS
U
SING
T
RANSITION
N
UMBERS
69
To select a transition from the Transitions Menu:
1 If necessary, press the appropriate Transition Category button to display the set of
transitions containing the one you want.
2 Use the
ARROW
keys to highlight the transition you want to use.
Blue highlights the currently selected transition. Use the
LEFT
and
RIGHT ARROWS
to
move the highlight horizontally. Use the
UP
and
DOWN ARROWS
to move the highlight
vertically. When you reach the bottom row of icons in the current menu, press
DOWN
arrow to display additional transitions in the category, if present.
3 Do one of the following:
a Press
PLAY
to select and play the current transition, or
b After highlighting the transition you want, press
OK
.
Using Transition Numbers
Every transition has a number assigned for reference and identification. The number
appears in the Transitions Menu just below each transition icon.
To select a transition using transition numbers:
1 Enter the transition number on the keyboard.
2 Press
OK
.
To immediately play back the transition, press
PLAY
rather than
OK
.
Refer to Appendix A, Transitions List, for a complete listing of transitions and their
assigned numbers.
If you make a mistake entering a number, press
OK
, enter the number correctly, then
press
OK
again.
NOTE
When you highlight a transition in a Transitions menu, the highlighting obscures
the transition number. The number below the transition icon represents the speed at
which the transition plays. The following section, “Adjusting Transitions” discusses
this.
The transition number…
in this example, number 14