Vicon Surveyor 99, Installation & Operation Manual

Page: 67 / 69

XX002 Rev 799 Surveyor99 Dome System Technical Information
••••
57
Control Hardware: Vicon’s NOVA V1422 Matrix Switcher, V1300, V1344 and
V1466 series NOVA CPUs, V1400-DVC System Console
and V1300X-DVC desktop keypad or V1300-RVC rack-
mounted keypad.
Control Software: Vicon’s ProTech software (or compatible) run on a standard
PC-type computer with an RS-422/485 half duplex protocol
interface.
Control Format: RS-422/485 data, simplex or half duplex protocol at 4800,
9600 or 19,200 baud or Vicon’s Vicoax II protocol
(superimposed data on composite video signal.) Mode is
automatically detected upon power-up and can be forced to
detect using Preset 95.
Control Display: On-screen, menu-driven system allowing full configuration of
the Surveyor99.
Screen Titling Capabilities: Programmable for Camera, Preset, Sector and Alarms.
Fixed for Auxiliary Function and Lens status.
(Camera: 1 for each).
(Preset: 79 maximum).
(Sector: 16 maximum).
(Alarm: 4 maximum).
Individual type enable/disable.
20 characters maximum.
Selectable position.
MECHANICAL
Application: Indoor or outdoor.
Mounting: In-Ceiling or Indoor/Outdoor Pendant Model. See Table 7.
Housing Types: Indoor Pendant Model Housing and Outdoor Sunshield.
Pendant Mount Size/Thread: Standard 1.0-inch NPT Pipe thread or metric equivalent.
Lower Dome Types: Units available for In-Ceiling or Indoor or Outdoor Pendant
Model mounts and in a variety of colors.
Dimensions: See Table 8
Weight: 4.5 lb (2.0 kg), basic unit.
Construction:
Plastic, aluminum and steel.
Finish: Off white Housing and Sunshield.