Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
47
2.8 Auto Called Number Redial (ACNR)
Description
This feature allows you to request and have the system retry a busy or no answer external call
until the call is connected or the feature is cancelled.
Operation
iPECS IP & LDP Phones
To activate ACNR while receiving busy, no answer
1. Press the
[REDIAL]
button.
2. Hang-up handset, or press
[SPEAKER]
.
To cancel ACNR while idle
1. Press flashing
[REDIAL]
button.
To cancel ACNR during an ACNR attempt
1. Lift the handset or press the
[MUTE]
or flashing
[REDIAL]
button.
SLT Phone
To activate ACNR while receiving busy, no answer
1. Place the outside call as normal.
2. If the called party is busy or does not answer, press and release the hook-switch, intercom
dial tone should be heard.
3. Dial ‘58#’, the ACNR code.
4. Wait off-hook until the call is answered.
System
1. The system initiates the ACNR process, starting the ACNR Pause Timer.
2. At expiration of the timer, the system activates the station’s speakerphone with the
microphone in the mute mode.
3. The system attempts the previous call.
4. When the called party answers, the user may answer by lifting the handset or pressing the
[MUTE]
button to communicate with called party.
Conditions
1. Four timers and a retry counter can be programmed.
ACNR Pause Time Time allowed between ACNR attempts.
ACNR Delay Timer At expiration of Pause Timer, if no Line is available,
the system will wait for delay timer before attempting
to access a Line.
