Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
242
3. When the busy station goes to Idle, the originator receives a callback ring.
4. When the originator answers the callback ring, a new call will be activated to the calling
station.
Conditions
1. A stand-alone IP Phone that supports H.450 can activate the Call Completion feature.
2. A station can leave or have only one callback message, a new request cancels the
previous request and the new request is honored.
3. When you call a networked station, if the station is in DND or does not answer, you will
not be able to leave a Voice message using the
[Message/Call Back]
button. You can
leave a Voice message only if the called station forwards calls to their Voice Mailbox.
4. When you receive Call Back ring, the system dedicates a network path for your call.
You must answer your Call Back ring prior to the expiration of the Network Transfer
Recall Timer or, the Call Back is cancelled..
5. There are two methods to provide Net Call Back, connection mode and connectionless
mode based on the Net CC Retain Mode.
Programming
Keyset Admin.
SYSTEM
Networking Basic Attribute (PGM 320)
Networking CO Line Attribute (PGM 322)
Network Numbering Plan Table (PGM 324)
Network Feature Code Table (PGM 325)
Web Admin.
NETWORKING DATA
Net Basic Attributes
Net CC Retain Mode, Net Trans Recall
timer
Net CO Line Attributes
Net Numbering Plan
Related Features
Call Transfer, Station
Net Call Transfer
Hardware
2.79.2.5 Net Call Camp-On (Call Offer)
Description
When calling to a networked station that is busy, you may camp a call on to the called station.
The called station receives a camp-on tone and the
[Hold/Save]
button LED will flash. Network
