Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
281
3.3 Intercom (ICM) Call
Description
A non-blocking ICM is available to all stations in the system. You may place an intercom call to
other stations in the system by dialing applicable digits as defined in the Station Numbering Plan.
Operation
iPECS IP & LDP Phones
To place an intercom call
1. Lift the handset or press the
[SPEAKER]
button to receive ICM dial tone.
2. Dial station number or press the
{DSS/BLF}
button.
3. For ring-back tone, await answer or, for Intercom splash-tone, speak and await answer.
SLT
To place an intercom call
1. Lift the handset to receive ICM dial tone.
2. Dial the station number.
3. For ring-back tone, await answer or, for Intercom splash-tone, speak and await answer.
Conditions
1. Intercom dial tone will time-out if action is not taken within Dial-Tone Time or if the time
between digits exceeds the Inter-digit Timer. Error tone is received should a time-out
occur.
2. ICM Dial tone is removed after dialing the first digit.
3. If the called station is busy, Intercom Busy tone is provided for the Busy Tone time (7
seconds) then, error tone is sent by the system. You may disconnect from the call or
activate a feature such as Message Wait/Callback prior to the time-out.
4. With your iPECS IP and LDP Phone, you can place consecutive Intercom calls without
the need to regain ICM dial tone (no need to hang-up) between calls; simply presses
another
{DSS/BLF}
button.
5. An Intercom call to a station in the HF answerback or Voice Announce mode (H or P
Intercom Signaling Mode) is not considered answered unless the called user lifts the
handset or presses the
[SPEAKER]
button (goes off-hook).
Programming
Keyset Admin.
STATION
Prime Line (PGM 113-Button 7)
SYSTEM
ICM Dial Tone Timer (PGM 181-Button 6)
Inter Digit Timer (PGM 181-Button 7)
