Vertical summit Operation Manual Download Page 330

Page: 330 / 440

Summit & Summit 800

Feature Description and Operation Manual

Issue 1.2

319

6. If a DISA caller encounters a system All Lines Busy, busy tone is received for 5

seconds before ICM Dial tone is again presented and the DISA caller may try another
call.

7. LEDs associated with the DISA Line appearance will provide normal status indications

at all stations except the Attendants. The LED for the Line at an Attendant will flutter at
240 ipm when busy.

8. An iPECS IP or LDP Phone user can only receive a DISA call with an available DISA

Line appearance button.

Programming

Keyset Admin.

CO/IP

DISA Account Code (PGM 142-Button 5)

DISA CO Access (PGM 142-Button 11)

DISA Attributes (PGM 146)

SYSTEM

DISA Retry Counter (PGM 160-Button 5)

DISA COS (Class of Service) Assignment (PGM 166)

DID/DISA Busy Destination (PGM 167-Button 1)

DID/DISA Error Destination (PGM 167-Button 2)

DID/DISA No Answer Timer (PGM 181-Button 2)

Unsupervised Conference Timer (PGM 182-Button 5)

TABLES

CCR Audio Text Tables (PGM 228)

Weekly Time Table (PGM 233)

Web Admin.

CO LINE DATA

Common Attributes



DISA Account Code, DISA CO Access

DISA Service Attributes

SYSTEM DATA

System Attributes



DISA Retry Count

DISA COS (Class of Service)
DID/DISA Destination
System Timers



DID/DISA No Answer Timer, Unsupervised

Conference Timer

TABLES DATA

CCR Table
Auto Ring Mode Table

Related Features



Day/Night/Timed/Scenario Ring Mode



Dialing Restrictions



Authorization Codes (Password)



Unsupervised Conference



Integrated Auto Attendant/Voice Mail



Auto Service Mode Control

Hardware

Summary of Contents for summit

























































































































































































































































































































































































































































Search results

Summary of Contents for summit

Reviews:

Brands by name

Popular brands

Vertical summit, Operation Manual

Search results

Summary of Contents for summit

Reviews:

Brands by name

Popular brands