Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
216
2.74
Station Call Coverage
Description
The Call Coverage feature permits your iPECS IP or LDP Phone to receive ring and answer calls
directed to a covered station. This feature is generally employed to allow a Secretarial answering
position to cover calls to other stations. When a covered station rings, the
{CALL COVERAGE}
button LED will flash and the covering station may receive ring (immediate or delayed) for the call.
The covering station can answer the call using the
{CALL COVERAGE}
button, terminating ring
at other stations. Once answered, the LED of
{CALL COVERAGE}
buttons for the station at
other covering stations will extinguish.
Operation of this feature requires a
{CALL COVERAGE}
button at the covering iPECS IP or LDP
Phone and the covered station must activate call coverage. A station can have multiple Call
Coverage buttons each covering a different station and multiple stations can have a Call
Coverage button for a given station.
Call Coverage has several options, as below that are configured in the system database.
Call Coverage On Busy
Call Coverage Through Mobile
Call Coverage Wake-Up call
Call Coverage Ring and Delay Ring
Operation
iPECS IP & LDP Phones
To assign a {CALL COVERAGE} button at the covering station
[TRANS/PGM]
+
{FLEX}
+ “67” + covered Station
[HOLD/SAVE]
To activate Call Coverage at the covered station
1. Press the
[TRANS/PGM]
button.
2. Dial “141”, the Call Coverage code.
3. Dial “1” to enable or “0” to disable Call Coverage.
To assign ring for a {CALL COVERAGE} button
1. Press the
[TRANS/PGM]
button.
2. Dial “142”, the Call Coverage Ring code.
3. Dial the delay in ring cycles (“0”-“9”).
4. When a covered station receives a call, the covering station will receive the following
display:
CALL FOR STA xxxx
FROM yyyy time
