Home
/
Vertical
/
summit
/
Operation Manual

Vertical summit, Operation Manual

Share

Page: 127 / 440

Vertical summit Operation Manual Download Page 127

Summit & Summit 800

Feature Description and Operation Manual

Issue 1.2

116

2.37

Executive/Secretary Forward

Description

iPECS IP and LDP Phones can be assigned as Executive/Secretary pairs. By activating DND, the
Executive also activates Unconditional Call Forward to the Secretary, which will forward
Executive calls to the Secretary. With the “CO Call to Secretary” option enabled, all outside calls
to the Executive forward to the Secretary regardless of the Executive’s station status. In addition,
if the Secretary is in DND, Executive calls sent to the Secretary route back to the Executive if the
“Call Exec If Sec in DND” option is enabled.

Each Executive can be assigned a “Grade” (01, highest ~12, lowest). Executives with a higher
grade can call lower grade Executives overriding the Executive/Secretary forward.

With the “ICM Call to Secretary” option (PGM229-Button 5) enabled, all intercom calls to the
Executive (except for calls from higher or same grade executive) forward to the Secretary
regardless of the Executive’s station status.

Callers to an Executive in DND can leave a Message Wait indication. The message waiting
indication is given to the Executive or Secretary station based on the system database and User
Programming options.

Operation

iPECS IP & LDP Phones

To activate/deactivate Executive/Secretary Forward from the Executive

1. Press the

[DND]

button to toggle Executive/Secretary Forward.

Conditions

1. An Executive may have multiple Secretaries and a Secretary may have multiple

Executives. Each forms a separate Executive/Secretary pair.

2. If the Secretary is busy when a call is received for the Executive, the caller will receive

busy tone.

3. The Secretary may override the DND status of the Executive to Camp-On and transfer

calls to the Executive.

4. A chain can be constructed by assigning the Secretary of one pair as an Executive of

another. Although a chain may be constructed, a loop back is not allowed.

5. If an Executive has multiple Secretaries, calls will automatically route to the Executive’s

first idle Secretary.

6. The Executive may use Call Forward to send calls to stations other than the Secretary.
7. Messages are left at the Executive or Secretary based on assignment of “Left

Message Exec”. When enabled (On), messages are left at the Executive’s station.

8. The Executive Grade can be assigned only for Country Code “82”, Korea.
9. The Executive can call to another executive who is same Group in ADM 229 – B7 even

though they are different grade.

«
...
125
126
127
128
129
...
»

Summary of Contents for summit

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands