Summit & Summit 800
Feature Description and Operation Manual
Issue 1.2
404
6.10
Disable Outgoing Line Access
Description
The System Attendant can place outside Lines out-of service, disabling outgoing calls on the Line.
This is normally done should an undetected fault in the carrier or system circuit interrupt service
over the Line. Incoming calls continue to be processed normally.
Operation
System Attendant
To disable/enable Outgoing Line access (toggle)
1. Press the
[TRANS/PGM]
button.
2. Dial “072”, the Attendant Station Program code.
3. Press the
{Line}
button of the line(s) to be disabled, confirmation tone is heard and the
status for the selected Line(s) is changed.
Conditions
1. The System Attendant may disable a busy Line. The feature will take effect after the
desired Line goes to idle.
2. Once the Line is disabled, all Attendant appearance for the disabled Line will flutter at
240 ipm, other stations will indicate the Line as busy and the LED is On.
3. The outside Line status is stored in battery-protected memory in case of a power
failure.
4. Multiple Lines may be enabled/disabled without redialing the Attendant Station
Program code. Confirmation tone is heard after each Line is enabled/disabled.
5. When the system detects a fault on a Line, the Line is disabled for outgoing access
automatically.
6. Incoming calls on a disabled Line will continue to operate normally.
Programming
Keyset Admin.
SYSTEM
Attendant Assignment (PGM 164-Button 1)
Web Admin.
SYSTEM DATA
Attendant Assignment
Related Features
Attendant Positions
Hardware
iPECS IP or LDP Multi-button Phone, a 24-button phone is recommended
