45
Revision 01 - 22.07.2019
Sleep only when all selected conditions are met
–
the device enters sleep mode only when all
selected events occur.
2.
Awakening Settings
Wake up by ignition
–
the device will wake up immediately after turning on the ignition.
Wake up by accelerometer
–
the device will wake up immediately after the start of movement fixed
by the built-in accelerometer.
Wake up after fall sleep in, min
–
the device will wake up N minutes after falling asleep regardless of
external events (ignition, start of movement, etc.).
SECURITY
The Security tab contains settings for access to the device by PIN and a list of authorized keys.
The PIN indicated in the field on the right will be used to connect to the device through the
Configurator program, as well as when connecting to any server using the WIALON protocol. Make sure
that the same password is specified in the WIALON server settings in the "Password to access the object"
section. By default, PIN access is enabled,
and the password is “1234”
.
Protect your device with a PIN code when using USB
–
if there is a checkmark - when you start the
“Configurator” program, when you try to connect to the device, you will be asked
for the PIN code specified
in the field on the right; if unchecked - when trying to connect to the device, the PIN code will not be
requested.
In the "Authorized phone numbers" section, you can specify up to 10 phone numbers for use in
"Scenarios".
In the "Authorized Dallas keys" section, you can add up to ten numbers of authorization keys of the I-
Button type. To use the authorization service, you must enable the authorization sensor (see the "Inputs /
outputs" part).