37
Revision 01 - 22.07.2019
The CAN-tracer and [Script] functions are similar in meaning, but in the CAN-tracer, the entire range
of values is recorded, there you cannot select individual frames and edit them as in [Scripts].
In addition, in [Scripts] (as in [List]], it is possible to create frames by manually filling in all the
information. To do this, you need to click the edit button for the existing "
" or add a new frame "
".
Herewith when creating a frame in the [Script] mode, it is possible to change the number of
repetitions, but in the [List] mode there is no.
At the very bottom of the window is a status bar of all three CAN-buses:
In addition to the active/inactive status, parameters are displayed here:
R.errors
–
number of wrong Rx frames;
T.errors
–
number of wrong Tx frames;
Rx drops
–
number of lost Rx frames;