27
Revision 01 - 22.07.2019
If you do not load the settings from the unit and try to change the CAN settings, a warning appears:
It also appears if the device was not connected at all. Therefore, before configuring CAN sensors,
you need to load the settings from the device by clicking the "Download" button in the left part of the
window.
After that, a list of already connected sensors, their current values and transmission settings will
appear in the table.
- transmit with the track;
- transmit with the period (in this case with 5 second period);
- transmit by the changing (in this case when the value will become equal 3);
- button for calling the individual window with settings of that one sensor (
like the “CAN
-sensors
settings” button, only when y
ou click on it, all sensors will be listed).