32
Revision 01 - 22.07.2019
Vega Sensor Type
–
sensor value type, integer, floating point, etc.
Vega Sensor ID
–
sensor ID, can take values from 2800 to 2927, a total of 128 sensors can be added.
Reset by no Data, s
–
if during the specified period this Frame ID is absent on the CAN bus, then
write the default value to the sensor. It can take values from 0 to 15 seconds. At 0 the function disabled.
Reset by Ign Off
–
if checked, then when the ignition is turned off, the default value will be written to
the sensor.
BitField Sensor
–
if checked, then this sensor is a bit and it takes no more than one bit. From a several
such bit sensors you can make one ordinary. To do this, you need to create several bit sensors and specify
the same Vega Sensor ID, and in the BitField bit pos field specify where every sensor will be recorded. At the
same time, it is mandatory to specify the same Vega Sensor Type for all those bit sensors.
Visualization
–
visualization of tuned parameters - allows you to see and check whether those bits in
the frame are exactly selected.