6
Revision 01 - 22.07.2019
Vega MT X CAN device is designed for monitoring of vehicles by the using of GLONASS/GPS
positioning systems including the determination of vehicle placement, speed and motion direction as well
as for transmitting of collected data through GSM.
Vega MT X have the built-in processor with a CAN-processor functionality and supports up to three
CAN-buses that allows to get a full information about vehicle.
Non-volatile memory allows to store information about events and statuses of the device in the
absence of power supply.
Writing of statuses into non-volatile memory carried out at once per minute and that
should be considered when operating with digital outputs statuses
Collected data transmits through GPRS technology on the dedicated server which from that data
may be get through a special program for latest analysis and processing on the dispatcher console. Support
of several servers allows to send information about vehicle status on the four servers simultaneously.
Setting of the device and firmware updating may be carried out through USB-port or by the air with
Configurator application.
The vehicle route is recorded as individual points in time (track). Along with the track, information is
recorded coming into the device from internal and external sensors, as well as from an additional
equipment. The block has a flexible setting for the period of saving track points: by the time (set in seconds),
by the distance (in meters), by the course change (in degrees). The readings of all sensors and the statuses of
the device can also be transmitted with different events: by the time, by the parameter changing, or along
with the track.
Configurator application also allows to realize the remote diagnostic of the device and save the
result to a file.