33
Revision 01 - 22.07.2019
CAN-SCANNER
The “CAN
-
scanner” tab displays information
coming from a data scanner physically connected to the
CAN-
bus. It is needed to determine all the information that is necessary for entering sensors in the “CAN
sensors” tab
.
If the scanner is connected, you can press the start button “
” and then all i
nformation from the
CAN-
bus will be displayed in the “Receive” field, and instead of the start button the stop button “
” will
appear. Consider the upper part of the window where the settings for displaying information from the CAN-
bus are located and the information is displayed.