35
Revision 01 - 22.07.2019
mode is selected, the information will be presented as a continuous log of values, a new line appears as
soon as the frame value has changed.
If the desired sensor is found, then by clicking the button for creating a CAN-sensor "
", you can
fill in part of the information automatically: frame ID, CAN-bus number, data type. And then fill in the rest
and immediately save this sensor in the device
In the hardware settings "
" you need to select only the speed and the appropriate operating
mode of the CAN-bus. Filters configured in this window relate to the operation of the device and will not
affect the operation of the scanner.
The magnifying glass icon “
” brings up a
window for recording frames from the CAN-bus. This
feature is called CAN-tracer.
When you click on the “Start Record” button, all information coming from the CAN
-bus in real time
will be recorded in the stream mode and displayed in the window. In this ca
se, the “New Entry” will appear
in the field on the right - the name can be changed. After the recording is completed, you can write the