44
Revision 01 - 22.07.2019
POWER SAVING
In the sleep mode, the device turns off the modem and the main power of the navigation module,
only its recharge for a hot start remains. Consumption of about 2 mA. The power indicator flashes every 3-4
seconds.
The “
Power
Saving” tab contains
the settings for switching the device to sleep mode and from it. But
there are a few non-configurable options.
1. The device always wakes up by connecting USB and opening the case (tamper 1 or tamper 2).
2. The device does not fall asleep while USB is connected, or the case is opened.
3. The device does not fall asleep if at least one tick with the awakening condition is not set.
4. Battery always charging when the ignition is on, regardless of whether the device is sleeping or
not.
1.
Sleep Settings
Sleep after ignition off, min
–
the device goes into sleep mode after turning off the ignition after the
specified number of minutes.
Sleep after stop, min
–
the device goes into sleep mode after stopping the movement after the
specified number of minutes.
Sleep after waking up, min
–
the device goes into sleep mode after the specified number of minutes
after waking up.