12
Revision 01 - 22.07.2019
4.
Run the Configurator application on the PC, press
“
Connect
”
button and choose the connection
method like
“
Connect through USB
”
.
5.
On the left menu choose “Settings”.
First, you need to make connection settings, after which you can configure and change other
parameters at any time remotely as needed (
See “Settings” part
). Connection settings are:
-
monitoring servers’ settings
(protocol, IP-address and port);
- network settings (SIM access point settings);
- settings for transmitting readings (information that will be transmitted to the server).
Pay attention to the settings for connecting to the engineering server using the VEGA
protocol. These parameters will be used when connecting to the device remotely
through the Configurator program
6. After setting connection parameters pr
ess the “Save” button
.
7. Disconnect USB-cable. Now the device is ready for installing on a vehicle.