18
Revision 01 - 22.07.2019
The Vega MT X CAN monitoring device allows you to fine-tune many parameters. The device can be
configured either remotely via GPRS, or directly via USB connection. This part describes the interface of the
"Configurator" program, with which the settings are made. The
“
Configurator
”
program does not require
installation and allows you to:
-
Fine-tune the device;
-
Diagnose the device and save result to the file;
-
Update the device firmware;
-
View the current state of the block in real time.
When running
the “Configurator”
application, you need to connect to the device, for this, click the
“Connect” button in the lower
left corner of the window. Further, depending on the connection method,
select “Connect
through
USB” or “Connect
through
TCP”. A remote connection is always made through an
engineering server using the VEGA protocol. Indicate the address and port that were specified during the
initial configuration of the connection parameters for this device with the engineering server.
From the proposed list, select the desired device and click "OK." Go to the “Settings” in the menu on
the left and click the “
Get settings
” button in the lower left corner of the window to see the current
device
settings.
After changing the settings, click the “Save
settings
” button to apply the selected settings.