30
Revision 01 - 22.07.2019
When all the parameters are configured, you need to make sure that the “Enabled” checkbox is
checked, then you must click the “OK” button in th
e
settings window and “Save
settings
”
button in the
general window - otherwise the settings will not be saved on the device.
After that, you can proceed to the settings of specific CAN sensors.
“
CAN sensors settings
”
button
- when clicked, a window for editing the sensors appears.
At the bottom of the window are the control buttons.
- add sensor
–
a new row will appear below the selected.
- delete sensor
–
the selected row will delete.
- up/down buttons
–
the selected row moves relative to the rest.