General information
94
General information
Cleaning
To maintain the condition and serviceability of the service tool, it is advisable to follow
the cleaning procedures below:
WARNING: Do not use solvents such as petroleum based cleaning agents,
acetone, petrol, trichlorethylene etc. These types of harsh solvent may seriously
damage the plastic casing. Do not even spray or pour this type of cleaner onto a
cleaning cloth.
WARNING: The service tool is not waterproof. Always dry the unit thoroughly after
cleaning or if it has been subject to accidental spillage.
The manufacturer recommends that you periodically inspect and clean the following
parts of the service tool:
• The case
• The display screen
• The keypad
• Adaptor cables and connectors
To clean the service tool, or any of its cables or connectors, apply a mild detergent
solution to a soft clean cloth that has been suitably dampened.
WARNING: Before cleaning, disconnect the service tool from the vehicle.
Display screen
During normal everyday use, the screen may become dusty or covered in grime. To
clean the screen, always use a soft, clean, antistatic cloth. If any stubborn stains or
marks remain, use a non-abrasive glass cleaner applied to a soft, clean cloth. Gently
wipe the cloth across the display until the marks have been removed.
Software updates
For the latest information on software updates go to: www.contisys-service.com.
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......