FastCheck
50
Use the
and
keys to select the 'FastCheck SAS' application and press
to
confirm the selection. To return to the previous menu, press the
key.
Turn the vehicle's ignition ON.
Use the
and
keys to select the vehicle manufacturer and press
to confirm
the selection.
Dependent upon the vehicle and application being run, you may be asked to choose
the particular system fitted to the vehicle. Select the correct system using the
and
keys and press
to confirm.
Select the required menu option using the
and
keys and press
to confirm.
The service tool will attempt to establish communication with the vehicle system. If
communication is unsuccessful, refer to
‘Communication problems’, page 10
.
Read DTCs
If any DTC codes are present in the system, a screen will be displayed informing you
how many codes were found. This will then be replaced by the first DTC code. DTC
codes are generated according to the vehicle and system manufacturer.
A typical DTC code
The fault number is displayed first, followed by the DTC code. In this example the fault
displayed is DTC number 38 - Right Low Pressure Sensor Circuit Signal High or Open
Circuit. If the description text is too long to fit on the display, '[...]' appears in the
MAIN MENU
1.
EOBD
2.
FastCheck ABS
3.
FastCheck Airbag
4.
FastCheck Climate
5.
FastCheck EPB
6.
FastCheck SAS
7.
FastCheck Service
8.
FastCheck TPMS
9.
User Menu
1.
Read DTCs
2.
Clear DTCs
3.
SAS Calibration
DTC 1 - 38 Right Low
Pressure Sensor
Circuit Signal High{ }
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......
