FastCheck
62
2. ECO service, ECO service flex - For most core European countries the Operator
can set the vehicle to either 'ECO Service' (the standard GM service plan which
used standard GM values for miles and days until next service) or 'ECO Service
Flex' (the values for miles and days until next service are dynamically set by the
vehicle’s onboard computers, which monitor how the vehicle is being driven and
set the Service Intervals accordingly).
For ECO Service Flex Petrol vehicles the service tool will program the vehicle with
the maximum number of miles allowed by the Flex system (22000 miles) and the
maximum number of days allowed (728, or 2 years).
For ECO Service Flex Diesel vehicles the service tool will program the vehicle with
the maximum number of miles allowed by the Flex system (31000 miles) and the
maximum number of days allowed (728, or 2 years).
These are default values which ensure that the Service Indicator will come on in
either 22000 or 31000 miles or 2 years, whichever occurs first, if the ECO Service
Flex system fails for any reason.
Vectra-C / Signum
Only a straight reset is available on these vehicles. The programmed Service Interval
values of miles and days until the next service cannot be altered.
Note:
The engine oil used on these vehicles is 'Long-life Oil'. When the engine oil is
changed the technician must use the 'Long-life Oil' reset option on the service tool
(see below) to reset the Engine Control Module. The technician must then select
'Service' again to restart the Service Interval Reset.
CAUTION: It is important to depress, and release, the brake pedal when prompted by
the service tool during the Reset procedure. If this is not done correctly the Reset will
not be successful.
Pre-CAN vehicles
The Multiplexer cable (A2C59512985) or the EOBD (J1962) pin-switchable cable
(A2C59512073), with switch position J2, must be used for pre-CAN vehicles
This function should be used after a vehicle has been serviced.
The vehicle is programmed with the number of miles and days (which ever one occurs
first) until the next service and the Service Indicator light is turned off.
The reset is started by selecting the 'Service' option.
To return to a previous menu, press the
key.
The operator must then select the 'switchable' cable.
Please ensure that the vehicle is stationary and check that all the vehicle's doors are
closed.
Press
on the service tool to reset the Service Interval.
If successful the service tool will display 'Service Reset Passed'.
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......
