FastCheck
74
Renault (Type 1)
This feature allows the user to read and clear faults, view live data, test the TPMS
display lights and reprogram the unit via the Command Menu.
The Command Menu features are:
1. Program tyre valves - This allows the user to program 1 valve or 4 valves by
a. Manually entering the valve code from the keypad. The code is written on a
label if the sensor is new, or if the sensor is used then remove the tyre and
read the code on the sensor
b. Automatically forcing the valve to emit the code by using a TPMS Valve
Activator Tool, or deflating the tyre pressure by at least 1 bar, or rotating the
wheel by more than 20 km/h. When deflating the tyre the valve will not
transmit until 15 minutes has elapsed.
Note
: If fault code 0007 is present, automatic coding will not be possible.
When using the TPMS Valve Activator Tool it should be placed resting on the
tyre under the appropriate valve. When the sensor has been excited and the
transmitted code has been received the service tool will indicate a successful
read. The option is then given to program the new code.
2. Select the winter tyre option - This is used during the winter in some countries
where the weather conditions require winter tyres.
3. Select the summer tyre option - This is used as default or during the summer
when winter tyres are changed.
4. Set control module with TPMS option - Programs the control module with the
TPMS option.
5. Set control module without TPMS option - Disables the TPMS option.
6. Set tyre pressure limits - Enables the setting of maximum and minimum tyre
pressure limits.
7. Change trigger limit.
8. Drive the actuator - Tests the TPMS display lights.
Renault (Type 2)
With these vehicles
all tyres need to be inflated to 3.7 bar
for programming to be
successful. In order for the valves to transmit their codes a TPMS Valve Activator Tool
should be used.
An option is given as to select the current tyre set (Summer/Winter). Follow the on
screen instructions which indicate the order the wheels are to be programmed in. After
operating the TPMS Valve Activator Tool alongside the requested wheel, if successful
a message will be displayed on the screen indicating that the valve code has been
detected and displaying the valve code. After all 4 wheel codes have been
successfully detected then an option is given to program the codes.
Note
: Remember to reset the correct tyre pressures when finished.
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......