User Menu
92
6. Restart the ContiSys OBD either by disconnecting and reconnecting the power
supply or by pressing the outer 4 buttons on the handset at the same time.
Note:
The
button displays on-screen instructions. The
button may be used to
cancel the operation and the original key will be retained.
Unit Serial No.
1. Once selected, the serial number of the ContiSys OBD is displayed on the screen.
This should match the number on the back of the unit. The serial number may be
requested by product support when issuing security numbers. The user cannot
change this number.
2. Press the
key to return to the User Menu.
CAN Converter (Firmware update)
The CAN Converter option allows you to check and update the CAN converter cable
(A2C59512664) firmware.
Note:
The CAN converter cable (A2C59512664) must be connected to service tool
before this user menu option can be used.
Get FW Version
1. Select the 'Get FW Version' item to display the current version of the firmware
within the CAN converter cable (A2C59512664).
2. Press
to return to the User Menu.
Update Firmware
1. Select the 'Update FW Version' item to check and update the version of the
firmware within the CAN converter cable (A2C59512664).
2. A message will be displayed with the current version and if a later version of the
firmware is available to update the firmware in the CAN converter cable
(A2C59512664). Press
to return to the User Menu. Press
to continue the
update process.
Note:
The update process must be allowed to fully complete once started and the
power must not be interrupted during the update process.
CAN CONVERTER
1.
Get FW Version
2.
Update FW Version
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......
