FastCheck
33
The fault number is displayed first, followed by the DTC code. If the description text is
too long to fit on the display, '[...]' appears in the bottom right corner of the screen.
This indicates that the text can be scrolled using the
and
keys to view the rest
of the description.
To view the next DTC (if more than 1 was found), scroll to the end of the text and press
the
key.
To return to the menu, scroll to the end of the text and press the
key.
Clear DTCs
Diagnostic trouble codes can be cleared using the 'Clear DTCs' option. When using
the option you will be prompted to turn the ignition off. Wait until prompted before
switching the ignition back on.
Start the engine to force the control module to run a system check. Verify that the
code(s) have been cleared by selecting 'Read DTCs'.
Note:
Reading DTC(s) without first starting the engine will only confirm that the stored
DTC(s) have been cleared. Faults may still be present in the system causing a DTC to
be stored next time the engine is started.
BMW/MINI vehicles
Note:
To switch the ignition ON for vehicles fitted with a start/stop button, insert the
remote key-fob fully into the ignition slot then press the start/stop button once (without
any foot pedals depressed).
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......