FastCheck
61
GM vehicles
Service interval reset
CAN vehicles - (Astra-H, Corsa-D, Signum, Vectra-C and Zafira-B)
For these vehicles the Multiplexer cable (A2C59512985) or the CAN converter cable
(A2C59512664) must be used for Service interval reset.
This function should be used after a vehicle has been serviced.
The vehicle is programmed with the number of miles and days until the next service
and the Service indicator light is turned off.
The Service indicator will come on again when either the number of programmed
miles is reached or the number of programmed days is reached, whichever occurs
first.
The reset is started by selecting the 'Service' option.
To return to a previous menu, press the
key.
The operator must then select the 'CAN Converter cable' if requested.
The service tool will communicate with the Instrument pack to determine the vehicle
model. If the vehicle model is unknown the operator must manually select the vehicle.
Note:
Vehicle must NOT be moving during this procedure and all doors must be
closed. The service tool will check the vehicle speed to ensure that the vehicle is not
moving before starting the procedure.
Security key
To perform the reset the operator must enter a 4-digit security key into the service tool.
This code will be programmed into the vehicle to allow a Reset to be performed.
The 4-digit security key is found in the owner’s handbook on a card with the other
important codes and numbers for the vehicle (such as the VIN number and Radio
code etc.).
Corsa D
The number of miles until the next service can be selected by the user, 9000 miles or
18000 miles can be selected. The number of days until the next service is always set
at 364 days (1 year).
Astra-H / Zafira-B
The number of miles until the next service and number of days until the next service
are calculated by the service tool depending on the operators selections of the
following:
1. Country - The miles and days until next service are set to values pre-determined
by GM, depending on the Country the vehicle is being used in.
The operator must first select the Continent and then the Country.
For core European Countries (UK, Ireland, France, Belgium, Germany, Spain,
Italy, Portugal, Holland, Austria etc.) select 'Other European Countries'.
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......