FastCheck
57
The following table displays possible service options together with the control module
used to reset each option.
The service tool will automatically identify all control modules required during the reset
process. If an unknown control module is found or communications cannot be
established, the operator is prompted to either continue or abort.
Note:
If the process is continued service options applicable to the unknown control
module will not be available (see service option table).
The current date and time information will be displayed by the service tool. Press the
key if the information is correct and continue or press
key to correct the
information.
Note:
If date and time used during the reset process is incorrect, this will result in
incorrect service intervals.
To change the date and time:
Use the
and
keys to change the value of the selected information indicated
by '/ \'.
Use the
key to change the selected date/time field.
Use the
key to complete the information entry.
The screen will display a final confirmation of the new data entered. Press the
key
to program the new information to the vehicle.
Pressing the
key at any point during the date and time change to will return to the
initial date and time confirmation screen. No information will have been changed.
The service options available on the vehicle are displayed as a list. Each option is
displayed with the service data:
The percentage reset value.
Service option
Control module
Engine oil
Engine (DME/DDE)
Particulate filter
Engine (DDE)
Diesel additive Engine (DDE)
Engine (DDE)
Front brake pads
Dynamic stability control (DSC)
Rear brake pads
Dynamic stability control (DSC)
Micro filter
Climate control (IHKA)
Brake fluid
Instrument cluster (INSTR)
Coolant
Instrument cluster (INSTR)
Spark plugs
Instrument cluster (INSTR)
Vehicle check
Instrument cluster (INSTR)
Statutory vehicle inspection
Instrument cluster (INSTR)
Statutory exhaust emission inspection
Instrument cluster (INSTR)
Summary of Contents for CONTISYS OBD - V3.0
Page 1: ...Instruction Manual ContiSys OBD 02 2010 3 0 EN...
Page 2: ......
Page 143: ......
Page 144: ......