Vauxhall Movano 2021 Owner'S Manual Download

Page: 20 / 211

Seats, restraints

Removal

E.g. when using a child restraint

system

30.

Pull up head restraint to uppermost

position. Press both release buttons

and pull the head restraint upwards to

remove.
Stow head restraints securely in load

compartment.
Do not drive with head restraints

removed if the seat is occupied.

Installation

Insert the rods of the head restraint

into their holes.

Lower head restraint as far as

possible, then raise head restraint

(press both release buttons first, if

necessary) until it engages securely

in desired position.

Front seats

Seat position

Warning

Only drive with the seat correctly

adjusted.

Danger

Do not sit closer than 25 cm to the

steering wheel, to permit safe

airbag deployment.

Warning

Never adjust seats while driving as

they could move uncontrollably.

Warning

Never store any loose objects

under the seats.
Underseat storage, storage box

37.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands