Vauxhall Movano 2021 Owner'S Manual Download

Page: 127 / 211

Driving and operating

125

Functionality

The system is only operable at

vehicle speeds above 37 mph and if

lane markings are available.
The system starts automatically when

moving off.
The operating conditions are checked

by the system. Therefore, both

control indicators

are illuminated

first in the Driver Information Centre.

When these conditions are met, both

control indicators

extinguish. The

system is activated.
If the operating conditions are not

met, both control indicators

remain

illuminated. The system is activated,

but is no longer effective.

Deactivation / Reactivation

Press

to deactivate / reactivate the

system.
The LED in the button

is illuminated

and a message in the Driver

Information Centre is displayed to

confirm the deactivation of the

system.
Upon reactivation, both control

indicators

remain illuminated until

the speed reaches 37 mph.
The state of the system remains in the

memory when switching off the

ignition.

Detection

When the system recognises an

unintended lane change, the control

indicator

)

flashes yellow.

Simultaneously, a chime sounds.
No warning is transmitted while the

turn light is activated and for

approximately 20 seconds after the

turn light is switched off. A warning

may be transmitted if a direction

marking (arrow) or non-standard

marking is crossed.

Operating conditions

Once engaged, the system is only

active when the following operating

conditions are met:

● The vehicle is moving forwards.
● No malfunction of the vehicle is

detected.

● The longitudinal marking of the

traffic lanes is clearly visible.

● The visibility conditions are clear.
● The trajectory is in a straight line

(or in the case of bends, they are

wide).

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands