Vauxhall Movano 2021 Owner'S Manual Download

Page: 110 / 211

108

Driving and operating

Lever type B

Turn the adjuster wheel to ON. The

control indicator

is illuminated and

a message is displayed in the Driver

Information Centre.
The system is still not active.

Activation of the functionality

Lever type A

Accelerate to the desired speed and

move the control lever u or

downwards -. The current speed is

stored and maintained. Accelerator

pedal can be released.
The preset speed can then be

changed by moving the control lever

u to increase or downwards

- to decrease the speed.
Briefly press increases or decreases

the speed by 1 mph, a long press by

5 mph.

Speed value is indicated in the Driver

Information Centre.

Lever type B

Accelerate to the desired speed and

move the control lever u for

about 1 second. The current speed is

stored and maintained. Accelerator

pedal can be released.
The preset speed can then be

changed by moving the control lever

u to increase or downwards

- to decrease the speed.
Briefly press increases or decreases

the speed in small steps, a long press

in larger steps.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands