Vauxhall Movano 2021 Owner'S Manual Download

Page: 23 / 211

Seats, restraints

Suspension seat sensitivity

Rotate knob to adjust the sensitivity of

the suspension seat to the driver's

weight.

Swivelling the seat

The seat can be swivelled up to 180°

from the forward-facing position.
Before swivelling the seat, slide seat

forth. Slide the seat only in the

forward-facing position.

Press the control and swivel seat.
Always return the seat to the forward-

facing position before driving and

ensure the seat is locked in place

before starting off.

Armrest

Armrests can be folded up when not

required.
Operate the wheel to adjust the lower

position.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands