Vauxhall Movano 2021 Owner'S Manual Download

Page: 18 / 211

Keys, doors and windows

Power windows

Warning

Take care when operating the

power windows. Risk of injury,

particularly to children.
Keep a close watch on the

windows when closing them.

Ensure that nothing becomes

trapped in them as they move.

Operate the switch for the respective

window by pushing to open or pulling

to close.

Pushing for longer than approx. half a

second starts the automatic opening

operation. To stop movement, push

the switch again.

Heated rear window

Operated by pressing

Heating is switched off automatically

after a short time.
Heated mirrors

14.

Sun visors

The sun visors can be folded down or

swivelled to the side to prevent

dazzling.

If the sun visors have integral mirrors,

the mirror covers should be closed

when driving.
A ticket holder is located on the

backside of the sun visor.

Summary of Contents for Movano 2021




















































































































































































































Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands

Vauxhall Movano 2021, Owner'S Manual

Search results

Summary of Contents for Movano 2021

Reviews:

Related manuals for Movano 2021

Brands by name

Popular brands