manualshive.com logo in svg

Vauxhall Movano 2021, Owner'S Manual

The Vauxhall Movano 2021 Owner's Manual is your comprehensive guide to operating and maintaining this exceptional vehicle. Gain access to vital information, troubleshooting tips, and detailed instructions, all available for free download at manualshive.com. Maximize your Movano's potential with this essential manual, ensuring a smooth and enjoyable ownership experience.

Share
Download
background image

176

Vehicle care

Set the jack to the necessary

height. Position it directly below

the jacking point in a manner that

prevents it from slipping.

With the jack correctly aligned

rotate the wheel wrench until the

wheel is clear of the ground.

6. If equipped with a side step the

jack has to be positioned at 45° to

not interfere with the side step.

7. Unscrew the wheel nuts.
8. Change the wheel.
9. Screw on the wheel nuts.

10. Lower the vehicle and remove the

jack.

11. Install the wheel wrench ensuring

that it is located securely and

tighten each bolt in a crosswise

sequence. The tightening torque

is 160 Nm for 15 inches wheels

and 180 Nm for 16 inches wheels.

12. Align the valve hole in the wheel

cover with the tyre valve before

installing.
Install the wheel nut caps.

13. Store the replaced wheel, the

vehicle tools 

3

 163 and the

adapter for the locking wheel nuts.

14. Check the tyre pressure of the

installed tyre and the wheel nut

torque as soon as possible.

Summary of Contents for Movano 2021




















































































































































































































Reviews:

No comments

Related manuals for Movano 2021

Federal Signal Corporation Vision SLR Quick Disconnect Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Federal Signal Corporation Vision SLR Supplement Manual preview
Vision SLR
Brand: Federal Signal Corporation Pages: 8
Whispbar K783W Fitting Instructions Manual preview
K783W
Brand: Whispbar Pages: 16
GReddy Intercooler Kit Type 31 Installation Manual preview
Intercooler Kit Type 31
Brand: GReddy Pages: 9
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2
POOL-LINE 110085 Assembly Instructions preview
110085
Brand: POOL-LINE Pages: 2
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Gacell SLH 27C User Manual preview
SLH 27C
Brand: Gacell Pages: 25
Federal Signal Corporation HighLighter Installation And Programming preview
HighLighter
Brand: Federal Signal Corporation Pages: 20
Easee Base 1-Way User Manual / Installation Manual preview
Base 1-Way
Brand: Easee Pages: 21
Scion 2013 iQ Warranty & Maintenance Manual preview
2013 iQ
Brand: Scion Pages: 58
SEC 6/911 Mounting Instructions preview
6/911
Brand: SEC Pages: 2
Kuda-Phonebase 041300 Installation Instruction preview
041300
Brand: Kuda-Phonebase Pages: 3
Jeep 2007 JK Wrangler Owner'S Manual preview
2007 JK Wrangler
Brand: Jeep Pages: 456
Honda 2013 Crosstour Owner'S Manual preview
2013 Crosstour
Brand: Honda Pages: 571

Brands by name

Popular brands

Load more brands